Factory authorized distributor for Chicago Pneumatic, Powerex, Pneumatech, and Mark Compressors, and an authorized Donaldson dealer. We also source parts and replacement units for most other major brands, so a mixed equipment fleet stays with one supplier. Southern California and Las Vegas.
Pictured: a Chicago Pneumatic CPM 5 tank-mounted compressor on a production floor.
Toolytics supplies industrial air compressor equipment sized, supplied, installed, and serviced across Southern California and Las Vegas, built around how a compressed air system actually works: compressor, dryer and filtration, storage, and distribution to point of use.
Rotary screw, reciprocating, and oil-free scroll equipment selected around your actual demand, pressure, and duty cycle. Most of what we install falls between 15 and 100 HP. Work out what size you need.
Four ways to make compressed air, matched to demand, duty cycle, air quality, and the pressure your equipment needs. Most of what we install runs between 15 and 100 HP.
The industrial workhorse for steady, continuous demand. Runs at a set pressure with long service intervals.
Motor speed tracks air demand, so the compressor makes only the air you use. The efficient choice when load swings through the day.
Class 0 air with no oil in the stream, for processes where a trace of oil is a defect. Scroll and oil-free screw designs.
Two-stage piston units for smaller shops, intermittent duty, and higher-pressure point work. Tank mounted or bare pump.
A booster is a compressor that raises existing shop air to a higher pressure for PET blowing, pressure testing, laser cutting, and process work. Air or nitrogen, from 3 to 40 HP and up to 580 PSI.
One representative model per compressor type, with Chicago Pneumatic’s published specifications. Final sizing is matched to your demand, pressure, and duty cycle.
Fixed-speed rotary screw
| Horsepower | 25 HP |
|---|---|
| Capacity | 99.4 CFM |
| Max pressure | 125 PSI |
| Outlet | 1.0 in |
Permanent-magnet variable speed
| Horsepower | 50 HP |
|---|---|
| Capacity | to 237 CFM |
| Max pressure | 175 PSI |
| Outlet | 1.25 in |
Oil-free scroll
| Horsepower | 10 HP |
|---|---|
| Capacity | 24.2 CFM |
| Max pressure | 145 PSI |
| Air quality | Class 0 |
Two-stage piston, tank mounted
| Horsepower | 5 HP |
|---|---|
| Capacity | 18 CFM |
| Max pressure | 100 PSI |
| Receiver | 60 gal |
Complete the system
Remove moisture, oil aerosols, and particulate before they reach your process or equipment.
Stabilize pressure, handle demand spikes, and reduce unnecessary compressor cycling.
Deliver air with lower pressure drop, cleaner installation, and easier future expansion.
Protect the system, simplify maintenance, and make operating conditions easier to monitor.
Automatic drains, oil-water separators, and condensate treatment for cleaner system operation.
Sequencing, pressure control, and system visibility for multi-compressor rooms and critical applications.
Filters, regulators, drains, and accessories selected around the needs of tools and process equipment.
Learn moreSend the equipment make, model, serial number, and required part information. We can help identify and source the correct items.
Produce nitrogen or oxygen on site from your compressed air and reduce dependence on cylinder or bulk delivery, where the application supports it.
PSA and membrane nitrogen for packaging, laser cutting, heat treating, and inerting, at purity up to 99.999% for your process.
Explore Gas GenerationPSA oxygen up to 95% purity for applications that would otherwise depend on delivered cylinders or bulk supply.
Explore Gas GenerationShare the existing equipment, operating pressure, application, available power, and production concerns. We’ll help identify the right next step.
The same Chicago Pneumatic relationship also covers industrial air tools and portable construction equipment. We supply, install, and service both across Southern California and Las Vegas.
Do you sell equipment, or only service it?
Both. We are a factory authorized distributor for Chicago Pneumatic, Powerex, Pneumatech, and Mark Compressors, and an authorized dealer for Donaldson Filtration Solutions. We supply, install, and then service what we sell, which means one vendor for the equipment and the maintenance behind it.
How do I know what size air compressor I need?
Size it on total air demand, duty cycle, and the pressure your equipment requires, not on horsepower alone. Adding up the nameplate ratings of every tool oversizes the system, and ignoring simultaneous use undersizes it. Our air compressor sizing guide walks through the method with published figures, or we can run a system assessment on site.
Do you carry parts for equipment you did not sell?
Yes. We source separator elements, air and oil filters, lubricants, belts, and valve kits across most major brands, OEM or quality aftermarket. Tell us the make, model, and serial number and we will identify the right part.
Do you sell pneumatic tools as well as compressors?
Yes. We supply the full Chicago Pneumatic industrial air tool line, including impact wrenches, grinders, drills, and assembly tools, with published torque and air consumption specs. For portable and construction equipment, see our Chicago Pneumatic Power Technique range.
Do you sell to businesses only?
We supply industrial and commercial facilities, not consumers. Our customers are manufacturing plants, fabrication shops, logistics operations, and maintenance departments across Los Angeles, Orange, Riverside, and San Bernardino counties, plus the Las Vegas metro. Everything is quoted rather than sold from a shelf.
Can you replace a compressor from a brand you do not carry?
Yes, and it is common. We service equipment from most major manufacturers and regularly replace aging units with Chicago Pneumatic, Pneumatech, or Mark equivalents. Call (844) 310-8665 and we will match the specification.
Last updated July 2026
The technicians who install a unit are the ones who maintain it. Warranty compliance handled, genuine parts, and one vendor for the equipment and the maintenance behind it.
Tell us what you need and we'll follow up quickly with pricing and availability. Call (844) 310-8665 or email [email protected].
